CAOC

Real-life story about a little girl's battle against Blount's disease.
Click here to read more about Mckenzie Upton.


12/02/2015 

During the past week, our group had been trying to do research and find a mentor who will help us along the way. We are waiting to hear from Dr. Jan Grudziak, a pediatric orthopedic specialist at Children’s Hospital of Pittsburgh. 

Information about a newly designed KAFO brace with a different mechanism will be updated under "Types of KAFO". 

Tomorrow, we are heading to TechShop for our first vacuum forming class. Hopefully, the class will inform and inspire us to create a brace with the help of the vacuum forming machine. 


12/03/2015 TechShop Update

Today we took a vacuum forming class at TechShop. The vacuum forming machine is widely used in commercial packaging and mass production. We wanted to compare vacuum forming to 3D printing and see which technique is more effective and also more efficient at producing a brace off of a leg model. We wanted to use the prosthetic leg Emma made last year for her project as a mold, but they couldn't find us plastic sheets big enough for the leg (although the leg fit perfectly fine on the machine). Therefore, we decided to use a small cylindrical 3D printed object as a mold just to see how the machine worked.
Here is a picture of the mold on the machine:



A closer look at the mold and the vacuum-formed product (clear plastic): 



We couldn't get the plastic off of the mold so we had to cut open the sides in order to pull it off...



Our biggest takeaway from this class is that vacuum forming may not work for our project because we would need plastic far thicker and sturdier than the one given to us in this class, and we also learned that it's hard to vacuum form certain shapes because the plastic would pop, and it's also incredibly hard to get the vacuum-formed plastic off of the mold. However, if we ever need to produce several models of the leg brace in a short period of time, we might come back to vacuum forming for help.
Click here to watch a video about vacuum forming.

12/11/2015
Today we took an Arduino class at TechShop. Each of us obtained a set of materials needed including breadboard, switch, sensors, motor, LEDs and various electronic components. We learned some basic Arduino programming skills and may further apply them onto the leg brace to collect data. 
 

12/15/2015
Today we had a meeting with Peggy Giesen, a pediatric physical therapist from the Learning Institute. 

Some thoughts and considerations we learned through the meeting are as following:

• Gait Pattern

• Medial/Lateral metal bar

• No quantitative data; redness & marking

• Locking the hinge

• Room for growth; easy adjustments

• both sides of ankle and knee; bony prominences-->soft padding

• foot plate; foot position

• orthosis inside the shoe

• Bilateral/unilateral-->leg length discrepancy; add height to shoe

• Compliance

01/29/2016
We had a very nice and informative meeting with Sean Greer from DeLaTorre Orthotics. 

He is a Certifed Orthotist with DeLaTorre Orthotics and Prosthetics. He specializes in pediatric bracing, especially body remolding devices such as cranial remolding helmets, scoliosis braces, and Blount's braces.

Notes from the meeting: 

Goals: build a theoretical model which allows the following:

1. safe, quick digital image capture; require a minimal amount of time for the baby to hold still in order to get a clear image of the leg

2. make the brace more appealing to parents-->increase compliance

• thickness of the brace
• fits inside the pant and shoe; “invisible”
• aesthetically appealing design
• room for growth→ less frequent visits, no need to make newer braces and thus reduce cost, avoid ?? nerve (beneath: where corrective force is exerted; above: better); however, more space means less control and less fitting

3. take technician out of the equation→ reduce medical expertise required in the fabrication process and thus lower the cost

• expertise needed for scanning and making adjustments to make sure the brace is working appropriately
• now: the shells are contoured to the shape of the bones and the upright is bent in order to align the shells
• metal bending is becoming a dying art; adds to cost→ off-the-shelf components (esp. straight aluminum upright) are to be attached directly to the customized shells while maintaining the straight alignment of the brace→ protruding rectangular platform

4. appropriate material to maximize comfortability

• 90% polypropylene (rigidity) and 10% polyethylene (flexibility)
• light, portable, doesn’t cause skin breakdown
• conditionally malleable? 4D printing: becomes bendable when heat is applied→ change shape to accommodate growth   click

5. 3-point pressure system

• Davis’ and Wolff’s laws of tissue adaptation and bone remodeling: inhibited growth where pressure is exerted
• exert pressure on the proximal, lateral side of tibia
• pressure sensor & alert system
• How tight should the straps be pulled? → make the call based on feeling (loosen the straps when a bruise/blister/open wound results)
• design a longitudinal study to investigate…

-How much pressure is required to correct the Q angle formed by the axises of the femur and the tibia?
-What is the threshold pressure value below which the kafo is no longer effective?
-Does this pressure correlate with age (critical window: 18-30 months) ?

• place a pressure sensor on lateral side of tibial shell to measure much pressure is applied when the strap below the knee is pulled this tight
• color lights indicating how tight the strap is pulled:

-red light signals too little pressure→ pull tighter
-green→ within the pressure range
-yellow→ too tight

Data

Different KAFO Designs

There are several different models of Blount's KAFO, but the general structure of each brace is the same -- there are five main components: a thigh/femoral cuff, a calf/tibial shell, a foot piece, one or two metal bars connecting the thigh cuff and the calf shell, and a few straps that secure the brace on the leg. The goal of every KAFO designed for Blount's disease is also the same, which is to exert corrective forces on the misaligned bones through several points of pressure and to guide the normal growth of tibia.

Model 1:

This double upright (two metal bars) brace has a quadrilateral brim-style thigh cuff, and its calf part has a posterior opening with a partial pretibial shell. There are two metal bars connecting the thigh cuff and the calf shell.

click on this link for more info on model 1.

Model 2:


This model is different from model 1 in that its thigh cuff has an anterior opening and is held in place by two straps. The calf piece is open in the front as well, and it looks like the calf and the foot are one piece. Note also that the upper and lower parts of this KAFO have irregularly curved edges (the thigh piece is longer on the medial side and the calf piece is longer on the lateral side).Two metal bars join the upper and lower parts of this brace. This is an example of the double upright M-L anterior opening KAFO.

Model 3:



This model looks a lot simpler and lighter than the previous two models. The main differences are that there is only one metal bar connecting the thigh cuff and the calf shell and there are only two straps.


more pictures of model 3...

Click on this link for more info on model 3.

This picture highlights the difference between single-upright and double-upright KAFOs. 

This picture shows different designs of the thigh shell. (a) is an anterior opening KAFO with a pretibial shell. (b) is a KAFO with a quadrilateral brim style. (c) is a narrow M-L brim style KAFO. Research shows that it's easier to put on the KAFO in (a) than those in (b) and (c).

Tutorials

We found the following links interesting:

Click on this link shows some basic understanding of the factors appropriately and efficiently treat children with Blount's Disease.

Click on this link is about using 3D printing to create a lightweight leg brace which is similar to our idea for the project.

Design Process

Ultimate Goals for our leg brace:

• Lighter weight

• Correct gesture and strength leg muscles

• Include sensor which can indicate the steps and time the user has produced

Steps to accomplish the goal:

• Use 3D model to create a basic structure of the leg brace. 

• Build upon the design and try to improve. 

• Utilize the resources from the TechShop. 

• Finalize the design.

• Do test runs and collect the data from leg brace. 

• Add pressure points and sensor. 

Images of Work in Progress

Karen, future biomedical engineer, was getting her leg 3D scanned (sacrificing herself for the public good)...

The first prototype of our leg brace was created by using cardboard, foam material, tape, and thread. 

 A smoothed 3D model of Karen's left leg

Model of the basic structure of our leg brace in Meshmixer 

Thigh Cuff

Tibial Shell

 second iteration pics 

     third iteration pics

Here are a set of pictures with each iterations included for the poster presentation:
     

    
    

Welcome to the Blount's Disease KAFO Blog!

Welcome to our research science blog! We are Karen and Min, and we are currently enrolled in a research science class. Through our research, we find out that the traditional way of making a knee-ankle-foot orthoses (KAFOs) for Blount’s disease(pathologic bow-leggedness), is really time consuming and not cost-efficient. In addition, a traditional KAFO normally cost from $3000 to $5000. Therefore, our goal is to build a functional prototype from a 3D leg scan to reduce the cost of the KAFO, improve the patient's compliance, and more importantly, collect quantitative data by adding an arduino micro-controller. To achieve this purpose, we will come up with a design that not only ensures stability but also enables a more natural gait using lightweight and low-cost materials such as plastic and carbon fiber. You can see our progress and explore more in this blog.

Information about Blount's Disease

(image from http://www.shafferseminars.com/IP/leg_bowing_ans3.html)

Q: What is infantile Blount's Disease?
A: Blount's Disease is a form of genu varum, a growth disorder of the shin bone (tibia), that causes bowing of the lower legs. Before the age of 2, most infants have naturally bowed legs because of their positioning in the uterus. As they age, the degree of bowing gradually diminishes, and their legs will eventually straighten out as their bones and muscles strengthen. This type of bowing is called physiological genu varum and is completely normal. However, in the case of Blount's dsiease, the bowing condition worsens over time because of an abnormality in the growth plate (physis) on top of the tibia. The uneven surface of the physis causes the lower legs to bend outward which impedes the normal growth of the tibia. Blount's disease is a form of pathological genu varum and should be treated as soon as the child is diagnosed with the disease.

Q: Does Blount's disease only occur in infants?
A: No. Although less common, Blount's disease can also be found in teenagers. In toddlers, the bowing is usually bilateral, meaning that both legs are affected; however, in teenagers, the bowing is usually only unilateral. Our project specifically deals with INFANTILE Blount's disease because it's more common and there are a lot more problems associated with making a brace that is specifically designed for toddlers. (Imagine having to hold down a crying two-year-old while he/she is being fitted for a leg brace and telling him/her that the unwieldy brace has to be worn for 23 hours every day? We all know that babies CANNOT be reasoned with...)

Q: What treatments are available for Blount's?
A: For younger children whose bowing condition is not so bad, leg braces need to be worn to correct the abnormal bone alignment. For those less fortunate kids and most teenager patients, osteotomy of part of the tibia is sometimes necessary. The condition worsens quickly if the disease is left untreated.

Q: What is a K.A.F.O? How does it help with the disease?
A: A KAFO is a knee-ankle-foot orthosis, and it is often involved in nonsurgical treatment of less severe cases of Blount's disease.

For more information, check out the following websites:
http://www.childrensorthopaedics.com/blountsdisease.html
http://www.orthopediatrics.com/docs/Guides/blounts.html